Reliable China Supplier For 35BYJ46 Geared Stepper Motors
We are a professional manufacturer of 35BYJ46 high-torque stepper motors with 20 years of R&D and manufacturing experience. We have a 70-person R&D team, 80-person QC team, and 30+ automated lines with 600,000 units daily capacity. We hold ISO9001, ISO14000, IATF16949, CE, RoHS and REACH certifications, provide 72-hour free 2D/3D drawings, full customization, and stable quality for global Fortune 500 home appliance customers.
Find The Right 35BYJ46 Stepper Motor Configuration For Your Application
Compare torque, gear ratios, and electrical specs below
Low Power Stepper Motor, Powder Metallurgy Gear, Unipolar 4-phase, Stable for Appliance Control.
- Rated Voltage:5V
- Reduction Ratio: 1/85
- Temperature Rise：60K
- Pull-in Torque: 140mN·m
- Step Angle: 7.5°
400 Hz rated frequency, 5.88 RPM, unipolar 4-phase, stable for home appliance drive.
- Reduction Ratio：1/85,1/127
- Pull-in Torque: 90mN·m – 2800gf.cm
- Noise: 40db
- Step Angle: 7.5°
- Rated Voltage: 12V
450 Hz rated frequency, unipolar 4-phase, Class E insulation, stable for industrial & appliance use.
- Rated Voltage:24V
- Reduction Ratio: 1/85
- Pull-in Torque: 100mN·m – 200mN·m
- Step Angle: 7.5°
Why You Need Maintex 35BYJ46 PM Stepper Motor
Our 35BYJ46 Tin-can stepper motors feature stable torque, no decay, and no oil leakage. Equipped with 100% pure copper windings, 30+ automated lines ensure high consistency. Tested with Zeiss equipment, more durable than products from small workshops & traders.
Strong & wear-resistant, no breakage under heavy load.
Low heat keeps the motor cool during long working hours.
Flexible voltage for various devices.
Universal dimension, easy to install.
Auto-lubricated for quiet, maintenance-free use.
Anti-rust coating for humid & coastal environments.
Safe, stable, and meets global safety standards.
Optimized magnetic circuit for high-step accuracy and smooth synchronous motion.
35BYJ46 Stepper Motor | 2800gf·cm High Torque Sintered Metal Gears
MAINTEX 35BYJ46 permanent magnet stepper motor adopts high-density powder metallurgy gears, stably outputting 2800gf·cm (274.4mN·m) high torque without tooth breakage or deformation. With automatic precision greasing, it runs quietly and has no oil leakage, and is more stable under heavy load. Temperature rise ≤60K, precision verified by Zeiss equipment. More durable than plastic gears, suitable for water valves, air conditioner dampers, and long-term heavy-duty applications.
35mm PM Stepper Motor Custom
We offer fast customization for 35mm Claw Pole stepper motors. We support custom shafts, wire length, JST/Molex connectors, voltage, torque, and gear ratios. As a national standard drafting unit with 30+ automated production lines, we ensure 35BYJ46 high reduction ratio small motor samples match mass production quality for stable volume manufacturing.
Resource
To learn more about our range of 35BYJ46 Claw pole stepper motor, please download the complete catalog.
To learn more about the details of the 35BYJ46 Anti-stalling stepper motor, please watch the video.
Download datasheets for our representative stepper motor models. For complete specifications or custom technical drawings, please contact our engineering team.
One-Stop 35BYJ46 Stepper Motor Manufacturer & Custom Solution
MAINTEX has a 45,000 ㎡ factory with 30+ automated lines, outputting 600,000 units per day. Our 35BYJ46 low backlash geared stepper motors feature sintered metal gears, high torque and noise ≤40dB. With 225+ patents, full certifications and full customization, we export to 100+ countries.
35BYJ46 Stepper Motor – Typical Applications
For commercial HVAC and large air dampers, the 35BYJ46 high-torque motor drives them easily. Ordinary 24mm motors often stall because they don’t have enough power. Our MAINTEX 35BYJ46 uses sintered metal gears and a 1/85 reduction ratio, delivering 2800gf·cm torque. It resists strong wind and keeps industrial ventilation positioned precisely, with no shaking.
For smart water valves and anti-scale needs, the 35BYJ46 has 2800gf·cm torque. It can easily open valves stuck by scale. Scale makes valves fail often, and standard 24mm PM motors usually get jammed. Our 35BYJ46 uses sintered metal gears for strong torque to break through hard scale. It passes the 72-hour salt spray test and Class E insulation, working stably in hard water areas for the long term.
High-end smart toilet lids are thicker and heavier—standard 24mm motors can’t handle them. Our MAINTEX 35BYJ46 PM stepper motor is made for heavy loads, with 2800gf·cm torque. It opens and closes smoothly and stably. Sintered metal gears don’t make noise like plastic ones, and temperature rise ≤60K keeps it safe for long use in damp bathrooms.
Outdoor PTZ cameras and traffic equipment shake a lot in strong winds. Ordinary 24mm motors aren’t strong enough to keep them steady. Our MAINTEX 35BYJ46 stepper motor has full metal gears and 2800gf·cm torque, resisting wind and vibration. Tested by Zeiss, it stays accurate and steady even in tough outdoor conditions.
More About Our Factory
- Data Sheet
| Type | 35BYJ46 Series Stepper Motor |
| Phase | 4 |
| Rate Voltage | Available in 5V, 12V, 24V |
| Rated Frequency | 300-750Hz |
| Step Angle | 7.5° |
| Exciting Method | 1-2 |
| Resistance | 15-400Ω |
| Gear Ratio | 1/85 |
| Rated Torque (min) | 60mN.m–2800gf.cm |
| Dimensions | φ35mm |
| Operating Temp Range | -20°C–80°C |
| Insulation Dielectric Strength | 600VAC/1mA/1s |
| Insulation Grade | E |
| Temperature Rise | ≤60K |
| Noise | ≤40dB(A) |
Testimonials
“We used 24mm motors for our smart toilet lids before, but the gears would slip under heavy loads. After switching to the MAINTEX 35BYJ46 high torque reduction stepper motor, the problem was completely solved. With 2800gf·cm torque and sintered metal gears, it’s extremely durable. We no longer have issues with broken plastic gears, which perfectly meet the reliability needs of our high-end products. ”
Mark ThompsonSenior Mechanical Engineer“Other suppliers take weeks to modify the shaft, but MAINTEX finished 3D drawings for the 35BYJ46 in just 72 hours. We required custom JST connectors and a D-shaft for compact spaces, and samples matched drawings exactly. As a national motor standard drafter, their precision and expertise speak for themselves.”
David ChenR&D Manager“Our automatic dispensing equipment needs high accuracy and a strong holding force. The 35BYJ46 with 1/85 reduction is much more reliable than 24mm motors. Even at 2800gf·cm peak torque, the sintered metal gears stay precise with no backlash, performing very stably. “
Roberto GattiRobotics Design Engineer
You get much longer life with sintered metal gears. They resist breaking and warping better than plastic, even under heat and pressure. The self-lubricating design reduces wear and avoids jamming issues.
You’ll immediately notice the power gap. A 24mm motor stalls at 400gf・cm, but our 35BYJ46 reaches 2800gf・cm. That’s 5 times stronger for your heavy loads like dampers and toilet lids.
We use automatic greasing so every motor performs consistently for you. Stable lubrication lowers friction and keeps the temperature rise at 60K. This meets strict quality standards from top brands like Gree and Midea.
You get high torque at a lower cost with a claw-pole design. The 35BYJ46 offers strong holding torque and great positioning accuracy without expensive encoders, perfect for your mass production.
Yes, you can safely replace NEMA 14 with 35BYJ46. It’s smaller, cheaper, and delivers up to 2800gf・cm for your low-speed, high-torque needs. It often outperforms bigger direct-drive motors.
Backlash creates small gear gaps that hurt precision. Our 35BYJ46 minimizes this for you with metal gears and precise greasing. You get stable, repeatable accuracy for HVAC actuators.
